Surveyors.io

Ground penetrating radar cost for hiring a GPR survey crew

Nov 19, 2026 · 8 min read

Surveyor matcher

The price range and turnaround for the job you describe appear here.

Traverse

Estimate for ,

typical local range · on site to drawing

A published range for this type of work, not a quote. Send the request and it is published; surveyors who join in your county can price it, and no number of quotes or date is promised.

Free for clients · You choose who to talk to

Hiring a ground penetrating radar (GPR) survey usually costs $1,000 to $5,000 per day for a field crew. Concrete scanning runs about $1,000 to $3,000 per day or is billed hourly with a two hour minimum, utility mapping $1,000 to $5,000 per day depending on how crowded the ground is, and a residential yard scan is often a flat $500 to $800 for a quarter to half acre. What you are really paying for is the deliverable: paint on the ground, a written report, or a map a designer can build on.

The day rates come from a July 2026 market overview by a geophysicist at SPH Engineering, and a September 2026 cost roundup lands on the same $1,000 to $5,000 band for professional field surveys. The yard and hourly figures are the published locator rates we used in our private utility locating cost guide. Below we break the price down by job type, walk through three priced jobs, and show when the radar marks need a licensed surveyor to put them on a plan.

Ground penetrating radar cost by type of job

GPR is one instrument used for very different jobs, and the price follows the job, not the machine. A crew scanning a slab before coring works close and fast. A crew mapping a commercial site walks a grid for hours and then processes the data. A cemetery search needs interpretation by someone who knows what a grave shaft looks like in radar.

JobTypical priceHow it is usually billed
Concrete scanning before coring or saw cuttingAbout $1,000 to $3,000 per dayDay rate, or hourly with a two hour minimum
Utility locating and mappingAbout $1,000 to $5,000 per dayDay rate, higher on dense urban sites
Residential yard scan, quarter to half acre$500 to $800Flat fee for the area
One acre full scan$1,100 to $1,500 and upFlat fee for the area
Hourly locating with radar and electromagnetic tools$150 to $250 per hourHourly, often with a minimum block
Archaeological or unmarked grave searchAbout $1,000 to $3,000 per dayDay rate plus interpretation and report
Geotechnical, void and large area surveysProject pricedQuoted by area and depth target

Mobilization is the hidden line. Many firms fold travel into the day rate inside their service area and add a trip charge beyond it, so a remote site with half a day of work can still be billed close to a full day. Ask whether the quote is portal to portal.

What decides the deliverable, and why it changes the bill most

Three buyers can hire the same crew with the same radar and pay very different totals, because they asked for different outputs.

Marks on the ground. The crew scans, paints and flags what it finds, and leaves. This is the cheapest output and fine when the only goal is to dig, core or drill safely this week. The marks wash away and there is no record.

A written report. Field notes, screenshots of the radar profiles and a sketch with approximate positions and depths. Contractors, insurers and cemetery boards often want this. Expect extra office time for every hour in the field, which is why archaeological work is quoted as day rate plus interpretation.

A surveyed map. When the findings have to sit on a design drawing, a permit plan or a site plan, the paint marks must be measured by a surveyor and tied to the property line and to elevations. On a private site that is the same scope as a topographic survey with the utility marks picked up. On a design project where the reliability of each line matters, the work is done to a quality level standard as subsurface utility engineering, where GPR is one of the tools behind quality level B.

Three priced GPR jobs

These examples apply the published ranges above to typical scopes. They are illustrations to help you budget, not quotes.

1. Concrete scan for six cores in a warehouse slab

A tenant needs six 4 inch cores for new floor drains and wants to miss the post tension cables and conduit in the slab. The scan covers a small square at each core location, about two to three hours on site with travel. On an hourly bill with a two hour minimum that is a small fraction of the $1,000 to $3,000 day rate, and many concrete scanning firms price this kind of job as a half day. Budget roughly a half day of the day rate, and ask the scanner to mark each clear zone directly on the slab so the coring crew does not have to interpret anything.

2. Utility mapping on a 3 acre commercial pad site

A developer is about to design a pad site with parking and a new storm line. After the free 811 ticket marks the public lines, the private lines, abandoned services and the plastic irrigation main are still unknown. A crew needs about two days with radar and electromagnetic locators: $2,000 to $10,000 at the $1,000 to $5,000 day rate, landing toward the low end on an open site and toward the high end on a former gas station lot with stacked lines. The surveyor then picks up the marks as part of the existing conditions survey. If the radar finds a line crossing the proposed storm route, that point is where a test hole is worth paying for.

3. Unmarked grave search on a half acre church lot

A congregation wants to expand a parking area next to an old burial ground and needs to know whether graves extend past the fence. A one day grid survey at about $1,000 to $3,000, plus interpretation and a report, is the usual scope. The report shows each probable grave shaft as an anomaly on a plan. If the expansion goes ahead, a surveyor stakes the edge of the anomalies so the paving contractor has a line to stop at.

What makes ground penetrating radar cost more

  • Soil. Radar signals fade quickly in wet clay and in salty ground, so the crew sees less depth and has to cross the area more times or add other methods. Dry sand is the easy case.
  • Utility density. An empty field is quick. A downtown block or an old campus with crossing, abandoned and unrecorded lines takes much longer to sort out.
  • Grid spacing and 3D. Single passes across a trench line are cheap. A tight grid that builds a 3D picture of a slab or a burial ground takes longer in the field and in processing.
  • Depth target. A shallow conduit in a slab and a sewer 10 feet down need different antennas and sometimes different crews.
  • Access and timing. Night work, lane closures, live retail lots and confined spaces all add hours.
  • Deliverable. Paint only, a report or a CAD map with coordinates, as explained above.

Is ground penetrating radar worth the cost?

Usually, when the alternative is cutting into something unknown. A single damaged post tension cable, a cut fiber line or a storm pipe designed through an existing gas service costs far more than a day of radar. It is less useful in heavy wet clay, where electromagnetic locating and test holes may give better value, and for metal lines that already have tracer wire, which electromagnetic tools trace faster. A good firm will tell you when radar is the wrong tool for your soil.

Can ground penetrating radar find PVC pipe?

Often, yes. That is the main reason to pay for GPR instead of only an electromagnetic locator, which follows metal or a signal put on a metal line and cannot see a plastic pipe without tracer wire. Radar reflects off the change in material, so it can pick up PVC water lines, plastic gas services and clay sewer pipe, provided the soil lets the signal reach that depth.

GPR contractor, locator or surveyor: who to hire

A GPR contractor or private locator finds and marks. A surveyor measures and seals the location on a plan. If you only need to dig or core safely, hire the GPR crew. If the result has to go on a permit drawing, a site plan or an engineer's design, you need both, and it pays to book them for the same week so the surveyor picks up fresh marks. Larger design projects bundle both under one subsurface utility engineering contract. For a home project such as a pool, our survey for a pool page covers the plan the permit office wants.

How to compare GPR quotes

Send every firm the same scope so the numbers mean something: the area or locations on an aerial photo, what you are looking for (utilities, rebar and cables, voids, graves), the depth that matters, the deliverable you need, the access hours, and any existing records. Then check each quote for mobilization, the minimum charge, processing and report time, and whether 3D is included.

If the radar findings have to land on a sealed plan, post the job once on Surveyors.io with the address and what you are building. As they become available, surveyors who work your county reply with quotes, and you can ask each one to price the utility pickup as its own line. On a site where the existing features all need mapping, the existing conditions survey page explains how that work is scoped.

Need it done right? Send one scoped request to licensed land surveyors near you and compare what they quote. Free for clients.

Post your survey job