Surveyors.io

As built drawings cost per square foot for renovating an existing building

Nov 20, 2026 · 8 min read

Surveyor matcher

The price range and turnaround for the job you describe appear here.

Traverse

Estimate for ,

typical local range · on site to drawing

A published range for this type of work, not a quote. Send the request and it is published; surveyors who join in your county can price it, and no number of quotes or date is promised.

Free for clients · You choose who to talk to

As built drawings of an existing building usually cost about $0.40 to $2.50 per square foot. Floor plans measured by hand sit at the low end, laser scanned drawings with ceilings and elevations sit in the middle, and full drawings that include mechanical, electrical and plumbing systems reach $2.00 to $2.50. Most firms charge a minimum of $1,000 to $2,500, so a small house rarely costs less than that.

Those ranges come from published fees, not from a calculator. HPAC Engineering puts field measurement and architectural backgrounds at around $0.40 to $0.45 per square foot and full drawings with MEP systems at about $2.00 to $2.50, and one design firm reported its own as-built fees over a year running from 4 cents to over 6 dollars a square foot. That spread is the real lesson. The price is set by what you ask for, so the cheapest way to buy as built drawings is to know exactly which sheets your architect needs before anyone quotes.

What as built drawings are, in the sense that matters for the price

As built drawings (also called existing conditions drawings or record drawings) show a building as it stands today: walls, doors, windows, stairs, ceiling heights, and, when ordered, structure, ducts, pipes and electrical panels. Architects need them before they can design a renovation, landlords need them for leasing plans, and building departments often want existing and proposed floor plans side by side in a permit set.

They are not the same thing as an as-built survey, which is a licensed surveyor's sealed drawing of new construction against the approved site plan. Our as-built survey cost guide covers that product and explains why the two get mixed up. This article is about drawings of the inside of an existing building.

As built drawings cost per square foot, by what you order

Every quote is built from two parts: capturing the building (tape, laser distance meter or a laser scanner) and drafting it (CAD sheets or a 3D model). The table shows typical 2026 US pricing for each combination.

What you orderTypical cost per sq ftNotes
Hand measured floor plans onlyAbout $0.40 to $0.45Walls, doors, windows. No ceilings or MEP.
Laser scan plus 2D floor plans and elevationsAbout $0.35 to $1.00Scan about $0.20 to $0.70, drafting about $0.15 to $0.35 on top
Laser scan plus Revit modelAbout $0.50 to $1.20Depends on level of development and visible MEP
Full drawings with MEP systemsAbout $2.00 to $2.50Older buildings with no usable records
Minimum project charge$1,000 to $2,500Applies to small houses and single suites

Scan rates in the table follow The Future 3D's 2026 laser scanning cost guide, which quotes $0.20 to $0.70 per square foot with a typical $1,000 minimum. The modeling bands are wider than they look, because a Revit model with every duct and pipe can cost more than the scan itself.

Three buildings, priced line by line

These are illustrative quotes inside the ranges above. They show where the money goes, which is more useful than a single average.

A 2,400 square foot house before a kitchen and bath remodel

The architect needs floor plans of both levels and two interior elevations. A firm with a scanner charges its $1,000 minimum for the scan and registration and $0.25 per square foot, or $600, for 2D floor plans and elevations. Total $1,600, about $0.67 per square foot. Measured by hand the same plans could come in around $1,000, but the scan also catches the out of plumb walls and the ceiling heights that cabinet makers ask about later.

A 12,000 square foot office floor before a tenant improvement

The design team works in Revit and needs ducts and sprinkler mains above the ceiling. Scanning at $0.30 per square foot is $3,600. Tying the scan to the building's survey control adds $600. An architectural model at about LOD 300 at $0.35 per square foot is $4,200, and modeling visible MEP adds $0.20 per square foot, or $2,400. Total $10,800, about $0.90 per square foot. Note that the model costs more than the fieldwork, which is normal.

A 60,000 square foot warehouse before a racking layout

The owner's engineer only wants the registered point cloud and models in house. Open bays need few scanner setups, so scanning runs about $0.10 per square foot, $6,000, plus $900 for control. Total $6,900, about $0.12 per square foot. Buying the cloud alone is the cheapest form of as built documentation when someone on your team can draw from it.

The full scope behind these numbers, including the accuracy levels and the comparison of scanning with other methods, is on our 3D laser scanning survey page.

How much do as built drawings cost for a house?

For a typical house of 1,500 to 3,000 square feet, as built drawings usually cost $700 to $2,500. Floor plans alone sit near the bottom of that range. Elevations, sections, a roof plan and a site plan push it up. Many firms have a minimum near $1,000, so a small house does not get much cheaper than that.

If the remodel adds square footage or touches the outside, the building department may also want the house shown on the lot with distances to the property lines. That part is a survey, not drafting. A site plan from a licensed surveyor is covered on our site plan survey page, and ordering it at the same time as the interior drawings saves a second visit.

What pushes the price up

MEP systems. Ducts, pipes and conduit above a ceiling take far longer to capture and draw than walls. Ask for them only where the design will touch them. A tenant improvement on one floor rarely needs the MEP of the whole building.

Complexity, not area. A 10,000 square foot mechanical room can need twice the scanner setups of a 10,000 square foot open office. Historic buildings with curved walls, ornament and many small rooms cost more per square foot than a modern shell.

Accuracy you do not need. Drawings for leasing plans are fine at a few centimeters. Structural tie-ins and prefabricated MEP need millimeters. Write the tolerance into the request. The U.S. Institute of Building Documentation publishes a Level of Accuracy specification for exactly this purpose, and naming a level such as LOA20 or LOA30 stops firms from guessing.

Access. Occupied offices often allow scanning only at night or on weekends. Locked rooms that need a second visit are billed.

How to pay less without getting worse drawings

  • Find old drawings first. Original permit sets from the building department or the owner's files let a firm verify and update instead of capturing from scratch.
  • Order only the sheets you need. Ask your architect for a list: floor plans, reflected ceiling plans, which elevations, which sections.
  • Buy the point cloud if someone can draw from it. The cloud alone can cost a third of a modeled deliverable.
  • Get quotes on one written scope. Same area, same sheets, same accuracy, same file format. Otherwise you are comparing different products.

Keep the invoice with your other renovation records. The drawings are part of the project cost, and whoever prepares your return, a CPA or a service like Taxfile if you file on your own, will ask what the project cost in total.

Who makes as built drawings, and who should you hire?

Three kinds of firms sell them: architects who measure their own projects, reality capture companies that scan and model, and land surveying firms that run laser scanners alongside their survey crews. A surveying firm is the right choice when the interior drawings have to line up with a site survey, an existing conditions survey of the lot, or a sealed document a permit office relies on, because one firm sets one coordinate system for both.

Questions buyers ask before ordering

How much do as built drawings cost per square foot?

As built drawings usually cost $0.40 to $2.50 per square foot. Hand measured floor plans sit near $0.40, laser scanned plans and elevations around $0.35 to $1.00, and full drawings including mechanical, electrical and plumbing systems around $2.00 to $2.50. Minimum charges of $1,000 to $2,500 make small buildings cost more per square foot.

How long do as built drawings take?

Field capture for a house takes a few hours, and an office floor of 10,000 to 20,000 square feet takes one to two days. Drafting 2D plans usually takes one to two weeks after that, and a Revit model with MEP often takes two to four weeks. Point cloud only orders can arrive within a week.

Are as built drawings worth it for a small remodel?

Usually yes when walls move, cabinets are built to fit, or the permit set needs existing floor plans. A wrong dimension found during construction costs more than the drawings. For a cosmetic remodel with no layout change, a contractor's own measurements are often enough.

Describe your building once above with the area, the sheets you need and the accuracy, and surveying firms that cover your county see the request as they become available and reply with a quote you can compare line by line.

Need it done right? Send one scoped request to licensed land surveyors near you and compare what they quote. Free for clients.

Post your survey job