Surveyors.io

3D laser scanning survey and scan to BIM services for existing buildings

A 3D laser scanning survey measures an existing building with a terrestrial scanner and delivers a registered point cloud, 2D CAD plans or a BIM model. Scanning alone usually runs about $0.20 to $0.70 per square foot with a minimum near $1,000, and scan to BIM modeling is priced on top. Post the building once to get quotes from surveying firms that scan.

Scoped requests · free for clients Published for surveyors who join in your county

Surveyor matcher

The price range and turnaround for the job you describe appear here.

Traverse

Estimate for ,

typical local range · on site to drawing

A published range for this type of work, not a quote. Send the request and it is published; surveyors who join in your county can price it, and no number of quotes or date is promised.

Free for clients · You choose who to talk to

Scope

What a 3D laser scanning survey gives your design team

A terrestrial laser scanner sits on a tripod and sweeps the room, recording millions of measured points in a few minutes. The crew moves the scanner through the building, usually every 15 to 40 feet indoors, until every wall, ceiling, beam, duct and pipe that matters has been seen from at least one setup. Back in the office the setups are stitched together (registration) into one point cloud, and a surveying firm ties that cloud to control points so it sits on a known coordinate system and elevation datum.

That last step is what separates a scan survey from a scan. A cloud that floats in its own local coordinates is fine for measuring a room. A cloud tied to survey control can be overlaid on the site plan, the existing conditions survey of the lot and the civil drawings without anyone guessing how they line up. When a renovation touches the outside of the building, the site work, or a new addition near a setback, ask for control from a licensed surveyor so the interior model and the exterior survey agree.

You choose how far the office takes the data. Some owners only want the registered point cloud, because their architect models in house. Most want 2D CAD floor plans, reflected ceiling plans, elevations and sections. Design teams on larger renovations ask for a Revit model built from the cloud, which is what scan to BIM means. Each step adds drafting hours, and drafting, not fieldwork, is usually the biggest line on the invoice.

Cost

3D laser scanning survey cost by deliverable

Published 2026 vendor ranges for US work. Area is gross floor area. A tight mechanical room takes far more setups than an open office of the same size, so complexity can move the price more than square footage.

3D laser scanning survey cost by deliverable
Deliverable Typical price Who orders it
Registered point cloud only About $0.15 to $0.25 per sq ft Architects and engineers who model in house
High density point cloud with full QC report About $0.45 to $0.75 per sq ft Structural, MEP and tight tolerance retrofit work
2D CAD plans, elevations and sections from the scan Scan price plus about $0.15 to $0.35 per sq ft Tenant improvement, permit drawings, leasing plans
Scan to BIM model (architectural, about LOD 300) Scan price plus modeling, detailed models often total $0.30 to $0.80 or more per sq ft Renovation design teams working in Revit
Field measured as-builts with MEP drawn About $2.00 to $2.50 per sq ft Older buildings with no usable record drawings
Minimum project charge About $1,000 to $2,500 Small houses and single suites

Ranges compiled from 2026 vendor pricing pages, including The Future 3D 2026 cost guide (scan rates and minimum), and from HPAC Engineering on as-built drawing fees (MEP inclusive range). Detailed pricing for drawings alone is in our as built drawings cost guide.

Worked examples

Three laser scanning survey quotes, priced line by line

Illustrative breakdowns inside the published ranges above. Ask each firm to price these lines separately, so you compare the same scope.

Three laser scanning survey quotes, priced line by line
Line item 2,400 sq ft house remodel 12,000 sq ft office renovation 60,000 sq ft warehouse
Scanning and registration $1,000 (minimum charge) $3,600 ($0.30 per sq ft) $6,000 ($0.10 per sq ft)
Survey control tie-in $0 (not needed) $600 $900
2D floor plans and elevations $600 ($0.25 per sq ft) Included in model $0 (cloud only)
Revit model, architectural $0 $4,200 ($0.35 per sq ft) $0
Visible MEP added to model $0 $2,400 ($0.20 per sq ft) $0
Total $1,600 $10,800 $6,900

The warehouse is the cheapest per square foot (about $0.12) because open bays need few setups and the owner only wanted a cloud for racking layout. The office lands near $0.90 per square foot because the model, not the scanning, is most of the work.

Accuracy

How accurate does your laser scanning survey need to be

The U.S. Institute of Building Documentation publishes a Level of Accuracy (LOA) specification so owners can write the tolerance into the scope instead of saying "accurate". Asking for a tighter LOA than the job needs is the easiest way to overpay.

How accurate does your laser scanning survey need to be
LOA Measured range Typical use
LOA10 Coarser than 5 cm Space planning, leasing plans, rough massing
LOA20 15 mm to 5 cm Most architectural renovation and interior fit-out
LOA30 5 mm to 15 mm Structural tie-ins, MEP coordination, prefabrication
LOA40 1 mm to 5 mm Equipment installation, steel connections
LOA50 0 to 1 mm Industrial and precision work, rarely needed for buildings

Source: the USIBD Level of Accuracy Specification. Put the LOA for measured data and for the model in the request so every firm prices the same target.

Compare

Laser scanning survey compared with other ways to measure a building

An honest comparison. A laser scan is not always the right buy.

Laser scanning survey compared with other ways to measure a building
Method Where it wins Where it falls short Best for
Terrestrial laser scanning survey Millimeter to centimeter data on every surface, ceilings and MEP included Costs more than a tape survey on a small simple space Renovations, MEP retrofits, historic buildings
Tape and laser distance meter measured survey Cheapest on a small, square, simple space Misses ceilings and out of plumb walls, depends on the drafter A single suite or small house remodel
360 camera or phone LiDAR capture Fast visual walkthrough, low cost Accuracy stated as a percentage of distance, not survey grade Marketing, facility walkthroughs, rough planning
Total station and level by a land surveyor Sealed, legally defensible positions and elevations Sparse points, not a full surface model Property lines, setbacks, floor elevations, site work

For the outside of the building and the lot, see the topographic survey and drone LiDAR mapping pages. For finished new construction against the approved plans, an as-built survey is the sealed product a permit office asks for.

Scope

What to include when you request a 3D laser scanning survey

Firms quote fast and close together when the scope is written down. Vague requests get padded quotes.

  • Gross area and floors. Include basements, mechanical penthouses and the roof if the design touches them.
  • The deliverable. Point cloud, 2D CAD sheets, or a Revit model, and the software version your architect uses.
  • Level of accuracy and level of development. For example LOA20 data and an architectural model at about LOD 300, with visible MEP or without.
  • Coordinate system. Local building grid, or tied to state plane and the site survey through a land surveyor's control.
  • Access windows. Occupied offices often need nights or weekends, which changes the crew cost.
  • Ceiling spaces. Say whether tiles may be lifted. Above ceiling MEP is a large share of the field time on retrofit jobs.
Process

How to get quotes for a laser scanning survey

1.

Post the building once

Give the address, floor area, deliverable and target accuracy. Surveying firms that cover your county see the request as they become available and reply with a quote.

2.

Compare quotes on the same scope

Check that scanning, registration, control tie-in and the modeling level are priced as separate lines, and how many business days the office needs.

3.

Field scanning

The crew scans room by room, often in one or two days for a mid size office, and takes control shots if the job is tied to the site survey.

4.

Point cloud, drawings or model

You receive the registered cloud with a QC report and, if ordered, CAD sheets or a Revit model your architect can design on.

Post your survey job
FAQ

3D laser scanning survey questions

How much does 3D laser scanning cost?

Scanning a building usually costs about $0.20 to $0.70 per square foot, with a minimum charge around $1,000. A registered point cloud alone sits at the low end. 2D drawings or a Revit model are priced on top, so a modeled office renovation often lands near $0.80 to $1.00 per square foot in total.

What is scan to BIM?

Scan to BIM is turning a laser scan point cloud into a building information model, usually in Revit. A modeler traces walls, floors, openings, structure and, if ordered, ducts and pipes from the cloud. The price depends on the level of development and how much MEP is modeled, and it is quoted separately from the scanning.

How accurate is 3D laser scanning?

A terrestrial scanner measures individual points to a few millimeters at room distances. The registered project accuracy is usually specified with a USIBD level of accuracy, often LOA20 (15 mm to 5 cm) for architectural work or LOA30 (5 to 15 mm) for structural and MEP coordination. Ask for a QC report that proves it.

How long does a laser scanning survey take?

Field time for a 10,000 to 20,000 square foot office is often one to two days. Registration takes a few days, and drafting or Revit modeling usually adds one to three weeks depending on detail. Point cloud only jobs can be delivered within a week of the scan.

Do I need a licensed surveyor for laser scanning?

Not for interior documentation in most states. You do need one when the data has to show property lines, setbacks, flood elevations or anything a permit office or lender relies on. Many surveying firms run scanners, so one firm can deliver both the sealed site survey and the interior scan on one coordinate system.

One scoped request beats six voicemails

Describe the parcel once. We pass your scoped request to surveyors who work your county as soon as they are available, and each one quotes it themselves. Posting is free for clients and quotes are never marked up.

Post your survey job