Surveyors.io

Bathymetric survey and hydrographic survey services for ponds, lakes and stormwater basins

A bathymetric survey measures the bottom of a pond, lake, reservoir or stormwater basin and turns it into depth contours, cross sections and a volume in cubic yards. Owners order one before dredging, to prove a stormwater pond still holds its design volume, to plan a dock or shoreline permit, or to settle what a reservoir actually stores. A licensed surveyor ties the soundings to the same elevation datum as the shore, so the result lines up with your site plan and with every contractor bid. Post the job once and request quotes from surveyors who work your county.

Scoped requests · free for clients Published for surveyors who join in your county

Surveyor matcher

The price range and turnaround for the job you describe appear here.

Traverse

Estimate for ,

typical local range · on site to drawing

A published range for this type of work, not a quote. Send the request and it is published; surveyors who join in your county can price it, and no number of quotes or date is promised.

Free for clients · You choose who to talk to

Scope

Who orders a bathymetric survey and what they get back

Four kinds of owner pay for this work. A landowner or golf course facing a dredging bid wants to know how many cubic yards of muck are really in the pond before signing. An HOA, municipality or commercial property with a permitted stormwater pond needs to show the basin still holds the volume it was designed for. A waterfront owner planning a dock, seawall or boat ramp needs depths and an ordinary high water line on a sealed drawing for the permit. A farm, water district or developer wants the storage curve of a reservoir or irrigation pond.

All four get the same core product. The crew runs a boat with a GPS receiver and an echo sounder along planned lines, then wades or rods the shallow edges where sonar stops working. Soundings are reduced to elevations on the project datum, and the surveyor delivers a contour map of the bottom, cross sections at set stations and, when asked, a volume table that shows how much water or sediment sits between two surfaces.

Sediment thickness is a separate measurement. Sonar sees the top of soft muck, not the firm bottom under it, so a dredging survey adds probing or a second, lower frequency to find refusal. Say at the start that the survey is for dredging, because a depth-only map cannot price a sediment removal job. The cost side of that decision is worked through in pond dredging cost and the sediment survey that sets the price.

Deliverables

Which hydrographic survey product fits your project

Most of the cost difference between quotes comes from what is delivered, not from the boat time. Name the purpose and the surveyor scopes the right product.

Which hydrographic survey product fits your project
Purpose What the survey measures What you hand to the next party
Pond or lake dredging Water depth plus sediment thickness to refusal, on a grid or line spacing set for volume Sediment volume in cubic yards by area, for apples to apples dredging bids
Stormwater pond volume check Current bottom compared with the permitted design surface Lost storage in cubic feet or acre feet, for the inspection or maintenance report
Dock, seawall or boat ramp permit Depths at the structure footprint, shoreline and water line elevation Sealed drawing the permit application and the marine contractor can use
Reservoir or irrigation pond capacity Full bottom surface tied to the spillway or outlet elevation Stage to storage table and contour map
Before and after a dredge job Repeat survey on the same lines and datum Pay quantity actually removed, to check the contractor invoice

Every row needs the same thing underneath it: soundings tied to a stated vertical datum by a licensed surveyor. Without that, the before and after surveys cannot be compared and the volume is an estimate, not a measurement.

Cost

What a bathymetric survey costs depends on these five things

Hydrographic work is priced by mobilization and field days, then office time for the surface and volume. These are the lines that change the number.

What a bathymetric survey costs depends on these five things
Factor Why it changes the price How to keep it down
Surface area One crew covers roughly ten acres of open water in a field day, so area sets the day count Survey only the areas you plan to dredge or permit
Shallow edges and vegetation Sonar does not read reliably in water under about two feet, so edges are rodded by hand Mark which shallow margins actually matter to the project
Sediment probing Finding firm bottom under muck is a second pass or a second sensor Order it only when the survey is for dredging
Access and launch No ramp means carrying a small boat in, and weeds or ice stop work Give the crew a launch point and a clear window
Deliverables A contour map is quick, a sealed volume report with cross sections takes office days Ask for the product your contractor or permit office needs, nothing extra

Ask each surveyor to quote mobilization, field days and the volume report as separate lines, so three quotes can be compared on the same basis. For land around the water, the topographic survey is usually added in the same visit.

Permits

Why permit offices ask for depths on a surveyed datum

Dredging and building in water is regulated. In navigable waters, work and structures fall under Section 10 of the Rivers and Harbors Act, and discharging dredged or fill material into waters of the United States falls under Section 404 of the Clean Water Act. Both are administered by the U.S. Army Corps of Engineers Regulatory Program, and the application drawings need depths and water line elevations, which is what a bathymetric survey supplies.

The federal statute carries an exemption that matters to farm owners: 33 U.S.C. 1344(f) lists construction or maintenance of farm or stock ponds among activities not requiring a Section 404 permit. State and local rules still apply, and a pond connected to a stream or wetland can change the answer, so confirm with your Corps district before you dredge. Where the shoreline itself is wetland, the line is set by a delineation, covered on our wetland delineation services page.

On federal navigation work, the Corps sets survey standards in Engineer Manual 1110-2-1003, Hydrographic Surveying. A private pond does not need that level, but a surveyor who knows it will describe accuracy, line spacing and datum on the drawing, which is exactly what a reviewer looks for.

Process

How a bathymetric survey runs from request to volume report

1.

Post the job once

Give the location, the approximate acres of water, the purpose and any old design plans. As they become available, surveyors who work your county reply with quotes.

2.

Set control on shore

The surveyor sets or recovers benchmarks so every sounding is on the same elevation datum as the land around it.

3.

Run the lines

A boat with GPS and an echo sounder follows planned lines, and the crew rods the shallow edges by hand. Probing is added for sediment.

4.

Build the surfaces

Soundings become a bottom surface, compared with a design surface, the firm bottom or a later survey.

5.

Deliver the report

You receive the contour map, cross sections and the volume table, sealed where the job requires it.

Post your survey job
Checklist

What to gather before you ask for hydrographic survey quotes

Five items cut field time and keep the three quotes comparable.

  • The purpose in one line. Dredging, stormwater volume, dock permit or capacity. It decides whether sediment probing is needed.
  • The original design or as-built plan. A permitted stormwater pond has a design bottom, and the survey compares against it.
  • A launch point. Ramp, beach or bank where a small boat can go in, and any gate codes.
  • The area that matters. A sketch on an aerial of the coves or the forebay you want measured.
  • Deadline and permit office. If a permit reviewer or a dredging contractor is waiting, say who and when.
FAQ

Bathymetric survey questions

How much does a bathymetric survey cost?

It is priced from mobilization, field days and office time. A crew covers about ten acres of open water a day, and sediment probing, shallow vegetated edges and a sealed volume report each add time. Ask for those lines separately so quotes compare fairly.

What is the difference between a bathymetric and a hydrographic survey?

Bathymetry is the depth part: the shape of the bottom. A hydrographic survey is the wider service that can also include shoreline, water levels, structures and sediment. For a pond or lake job the two names usually describe the same work.

Can a bathymetric survey measure sediment depth?

Only if it is scoped for it. Standard sonar reads the top of soft muck, so the crew adds probing or a lower frequency sensor to find the firm bottom. Ask for sediment thickness by name when the survey is for dredging.

Do I need a licensed surveyor for a pond depth map?

For a fishing map, no. For dredging bids, permits, stormwater reports or a pay quantity, yes, because the depths must sit on a stated datum and be signed by someone accountable for them.

Can a drone do a bathymetric survey?

Drones map the dry banks well, and a few systems read very clear shallow water, but murky ponds still need sonar from a boat. Many crews combine both, see drone and lidar mapping.

One scoped request beats six voicemails

Describe the parcel once. We pass your scoped request to surveyors who work your county as soon as they are available, and each one quotes it themselves. Posting is free for clients and quotes are never marked up.

Post your survey job